Kogan KAWNDBIDETB, User Manual

Page: 20 / 24

Buzzer Buzz once: Received instruction from controller.
Buzz twice: Auto operation when the user stands up
Buzz three times or more: Indication of malfunction.
Problem Possible Cause Troubleshooting
No power.
The electrical outlet is not
connected to power supply
or the plug is not insert to
the bottom.
Check if the electrical outlet
is connected to the power
supply; press the reset key
on the plug.
No water comes out
while cleaning.
Low pressure of water
supply.
Raise the water pressure.
Water inlet filter blocked
Remove and clean the filter
according to the Cleaning &
Care section.
Cleansing water in not
warm enough.
Water temp setting is
incorrect..
Readjust temperature.
Seat does not heat.
Seat temp setting is
incorrect or the product is in
power saving mode. Readjust temperature.
Seat and cover are
loose.
Fixed bolts are loose. Tighten the bolts.
No response when
pressing the key.
Key fault.
Reboot or contact
Kogan.com for assistance.
Product ‘Buzz’ three
times and then turns off.
The heater has entered self-
protection mode.
Check whether the water
supply to bidet is normal.
Disconnect the power and
wait 5 seconds and then
turn on the power again.
TROUBLESHOOTING