Kogan KAWNDBIDETB, User Manual

Page: 18 / 24

3. Clean the filter: Remove the filter and clean it thoroughly. Rinse off dirt or clean
the filter with a toothbrush.
4. Reattach the filter: Reinstall the filter by following the removal steps in reverse
order until complete.
Extended periods without use
•
If the bidet is not being used for an extended period of time. Turn off the inlet valve
and power supply.
•
Do not turn off the inlet valve and power if the room temperature will be lower than
0°C, your bidet will enter the anti-freeze program automatically.
Note:
•
Do not use any cleaning agents. Clean it with water only.
•
Do not use excessive force when cleaning, otherwise the filter will be deformed or
damaged, affecting normal use.
Note:
Open the water inlet valve after installation and confirm there's no water leakage.