Koei Unic - 05 Operation Manual Download Page 2

In order for better and safety use of the product for a long period, please observe this 
“ WARNING and CAUTION “ carefully. 
Here are the specification and operation manual for the product to prevent suffering 
injury or loss by accidents.  
The contents are divided into “WARNING” and “CAUTION” for different degree of  
risks.  
Please strictly observe them, as both of them are very important for your safety. 

FOR YOUR SAFETY 

     WARNING: 

Improper handling of the product disregarding the notes under this 

mark may cause injury or death to a man. 

         

CAUTION: 

Improper handling of the product disregarding the notes under this 

mark may cause injury or material loss. 

WARNING 

* This product is not of explosion-proof.

Do not use it in the environment with flammable gas (gasoline etc.) or
corrosive gas.

* Do not dismantle the actuator from the valve during power operation.
* Do not make wiring work when power is being supplied.

CAUTION 

* Do not drop the product or give a shock to the product, for it may cause

defects to the product. 

* Do not get on the actuator, or it may cause defects or an accident.
* Do not make wiring work in the rain or in splashing water.

Summary of Contents for Unic - 05




















Reviews: