K259XX Constant Temperature Water Bath
Operation and Instruction Manual
K295XX-Manual
-
7-
Bath Interior
Dimensions
(l x w x h,in.(cm)):
12” x 18 x 22” (30x46x56)
Overall
Dimensions
(l x w x h,in.(cm)):
18” x 20” x 49" (46x51x124)
Net Weight:
158 lbs (71.1 kg)
Shipping Weight:
186 lbs (84.4 kg)
Shipping
Dimensions:
15.4 Cu. ft
2 Safety Information and Warnings
Safety Considerations:
The use of this equipment
may involve
hazardous
materials and operations.
This manual does not purport to address all of the
safety problems associated with the use of this
equipment. It is the responsibility of any user of this
equipment to investigate, research, and establish
appropriate safety and health practices and
determine the applicability of regulatory limitations
prior to use.
Equipment Modifications and Replacement
Parts:
Any modification or alteration of this
equipment from that of factory specifications is not
recommended, voids the manufacturer warranty,
product safety, performance specifications, and/or
certifications whether specified or implied, and may
result in personal injury and/or property loss.
Replacement parts must be O.E.M. exact
replacement equipment.
Unit Design:
This equipment is specifically designed
for use in accordance with the applicable standard
test methods listed in section 1.2 of this manual.
The use of this equipment in accordance with any
other test procedures, or for any other purpose, is
not recommended and may be extremely hazardous.
Chemical Reagents Information:
The use of
chemicals and reagents with this equipment may
exhibit potential hazards. Any use must be
familiarized with the possible dangers before use.
We recommend consulting the Material Data and
Safety Sheet (MSDS) on each chemical reagent for
safety information. MSDS information can be easily
located on the Internet at http://siri.uvm.edu or
http://www.sigma-aldrich.com.
3 Getting Started
3.1 Packing List
K259XX Constant Temperature Water Bath
115V/230V
Comprised of:
- Constant Temperature Bath
- Mechanically Refrigerated Chiller
- Insulated Connection Tubing
Accessories (purchased separately):
K26150 Pressure Hydrometer Cylinder
251-000-001 ASTM 101H Thermohydrometer
251-000-004 ASTM 310H Thermohydrometer
250-000-22F ASTM 12F Thermometer
Range: -5 to +215 °F
250-000-22C ASTM 12C Thermometer
Range: -20 to +102 °C
3.2 Unpacking
This unit comes packed in a crate. Remove the
bath from the crate and place on the floor with
approximately 12” of space between the back of
the bath and the wall for airflow.
Blocking the
airflow will cause a malfunction to occur.
WARNING:
Be sure two or more individuals
are available for extracting and moving the
instrument from box to the floor. Individuals must
lift in accordance to proper technique. See Figure
below.
Unwrap the unit and wipe the shell with a soft cloth
to remove smudges caused by wrapping material.
Very high ambient temperatures would also affect
the efficiency of the unit. It is advisable to maintain
the environment of the machine below 22.78°C
(73°F).
Connect the line cord to a properly fused and
grounded receptacle with the correct voltage as
indicated in section 1.3.
