Koden MDC-5004, Operation Manuals

Page: 97 / 192

MDC-5000 Series Chapter 4 Target (AIS and TT)
0093153004-00 4-3
Set TT ID DISP TYPE
ID can be displayed with TT (ATA) target.
Set items: NUMBER
Set ID DISP SIZE
This menu is used to specify display ID size.
Selection values: X-SMALL, SMALL, MEDIUM, LARGE
Set Input range
This is to set up the operation range of TT (ATA) and AIS.
It designates the entire operation range of TT (ATA) and AIS. So, TT (ATA) and AIS do not function
outside of the range.
1
Press MENU key to display
“Menu”.
Select [TARGET] => [INPUT RNG], and press ENT key after selecting the setup value.
Setting value: 1.0NM to 64.0NM
ASSOCIATION
When an AIS target and a tracked target of TT (ATA) are the same target, it is automatically associated
to a single target.
Select priority of the association with either AIS or TT (ATA).
If the low-speed ship is associated and displayed with TT priority, then HDG may be unstable. So, the
display with AIS priority is recommendable.
1
Press MENU
key to display “Menu”.
Select [TARGET] => [ASSOCIATION] => [ASSOCIATION], and press ENT key after selecting the
setup value.
ECHO VECT
TRAIL CPA/TCPA
DISPLAY CPA
ALARM TCPA
TARGET ⇒ AIS ID DISP TYPE ASSOCIATION OFF/TT/AIS
NAV TOOL TT ID DISP TYPE
⇒
CHG SELECTED TGT
MAP ID DISP SIZE SETTING
RNG/CRS/SPD/SPD LIM
BRILL INPUT RNG /TIME REPRIVE/RATIO
SYSTEM ASSOCIATION
MAINTENANCE AUTO ACQ AREA