Koden MDC-5004, Operation Manuals

Page: 130 / 192

Chapter 7 System and Maintenance menu operation MDC-5000 Series
0093153004-00 7-2
7.3 Sound setting
Sound menu is to turn sound ON/OFF, setup frequency of sound in Operation unit, key click sound and
external buzzer.
Sound ON/OFF
1
Press MENU key to display
“Menu”.
Select [SYSTEM] => [SOUND] => [SOUND] => select [ON] or [OFF], and press ENT key.
Sound frequency
1
Press MENU key to display
“Menu”.
Select [SYSTEM] => [SOUND] => [FREQUENCY] => select [1 to 8] and press ENT key.
Selection values: 1 to 8
1: Lowest frequency
8: Highest frequency
Key click ON/OFF
1
Press MENU key to display
“Menu”.
Select [SYSTEM] => [SOUND] => [KEY CLICK] => select [ON] or [OFF], and press ENT key.
External buzzer setting
External buzzer signal (Failure alarm) can be output from J1 connector on the back panel.
Output signal is relay contact. (Alarm contact will close in case of failure)
Output of relay contact is continuous when set to continue.
Output of relay contact is intermittent when set to interval.
1
Press MENU key to display
“Menu”.
Select [SYSTEM] => [SOUND] => [EXT BUZZER] => select [OFF], [CONTINUE] or [INTERVAL],
and press ENT key.