Chapter 5 Basic Operation KGP-925
5-10
0093192502-00
5.8 Displaying average speed, average bearing and elapsed time
(1) Press [MODE] key until
A
(NAV1) screen appears.
(2) Press [SEL] key until page 3 screen appears.
What are velocity made good, course made good,
and elapsed time?
Velocity made good: Speed that is calculated by dividing the distance between the origin (the point
where you set the elapsed time) and the present position by the elapsed time.
Course made good: A true bearing from origin to present position.
Elapsed time: The time elapsed after your power-on or after you have pressed the
CLR
(Reset)
key.
NOTE: This function is also available even when the waypoint navigation, root navigation
or anchor position is in operation.
Velocity made good
(Example: 15.0 knots)
Course made good
(Example: 152.1')
Elapsed time
(Example: 05 hours 59 min 29 sec)
LAT/LONG mode (Example)
Data displayed when you press MOB key
Symbol (
O
:Fixed), storage
date, storage time
Storage position
Storage number
Data displayed when you press EVT key
Symbol, storage date,
storage time
Storage position
Summary of Contents for KGP-925
Page 1: ......
Page 37: ...Chapter 5 Basic Operation KGP 925 5 6 0093192502 00 Page 4 Close up of PLOT screen ...
Page 143: ......
