Koden CVS-126, Operation Manual

Page: 28 / 73

Chapter 1 Basic Operation CVS-126
1-14 0093132702-08
3
Press the [EVENT] key.
When you decide, the red line is drawn on
the image of the echo sounder at the point
you designate and the latitude and longitude
of the point you designate is stored in the
destination list.
At this moment, the number of the stored
destination list is displayed.
4
The navigation display (NAV1) is displayed
and the WPT navigation starts.
Note: The display of NAV1 is displayed.
5
To stop the fishing hot spot, cancel
destination navigation. (See: [2.14 Preset/
WPT edit/ WPT delete of Waypoint], [Cancel
the NAV].)
1.10 Use of [FUNC] key
At ex-factory, the [Image Speed] is assigned to
the [FUNC] key.
The function settable to the [FUNC] key can be
selected among [Image Speed], [IR], [Color
Rejection], [Noise Rejection], [Shift], [Zoom
Range], [Zoom Start], [A scope], [White line],
[Background color], [Disp width], [Nav start],
[NAV1], [NAV2], [Image swap], [Image recall] and
[Sona-tone]. Set the function frequently used for
your convenience.
Selecting the [FUNC] key
1
Press the [FUNC] key.
2
Select the setting with [ ] key or [ ] key.
Example [Image speed]
Caution: When the fish symbol function is
made effective, the image speed
becomes two kinds ([Speed5 (1/1)] or
[Stop]).
3
Press the [MENU] key to close the menu.
Preset of [FUNC] key
1
Press the [MENU] key.
2
Select [System]

[FUNC key set] . (Press
the [ ] key or [ ] key or [ ] key.) (See [2.1
How to operate the menu])
3
Press the [ ] key.
4
Select the function. (Press the [ ] key or [ ]
key)
Image speed
Speed1
Speed2
Speed3
Speed4
Stop
Speed5 (1/1)
Speed6
Speed7
Speed8
Speed9
Cursor (Redline)
L H
Lat/Lon