Koden CVS-126, Operation Manual

Page: 23 / 73

CVS-126 Chapter 1 Basic Operation
0093132702-08 1-9
1.6 Switch-over of Range
The range of measured depth displayed on the
display can be changed.
To meet your purpose, select the range of
measured depth.
Setting the range switching to auto
range
By following automatically the bottom, the image
of echo sounder in the suitable range of
measured depth can be displayed.
This mode is convenient to display always the
range from sea level to bottom.
The range value
changes
1
Press [ ] or [ ] key of [ RANGE ].
2
Select the [Auto range]. (Press [ ] or [ ]
key of [ RANGE ])
3
Press [MENU] to close the menu.
When [Auto range] is set, the [R:A] is
displayed at the upper side of menu.
Caution: At auto range, this sounder can
sound the area up to the maximum
sounding registered. The maximum
range is 800 m. At the initial setup,
the range is up to 200 m. (See [3.4
Setting of Basic set Item, Sounding])
Setting the range switching to Manual
range
The range can be manually selected:
1 Press [ ] or [ ] key of [ RANGE ].
2 Select the range you desire to set. (Press
[ ] or [ ] key of [ RANGE ])
3 Press the [MENU] key to close the menu.
When the [Manual] is set, the [R: M] is
displayed at the upper side of menu.
1.7 Setting of Shift
The [Shift] (Manual Shift) and [Auto Shift] are
provided.
Manual Shift (Shift):
The image range is shifted up and down.
(Setting: m, fm, I.fm: 0 ~ 300, ft: 0 ~ 1000)
Caution: Only when the [shift] is
registered in [FUNC] key, it is effective.
It is invalid when not registered. (See
[1.10 Use of [FUNC] key)
Caution: When the equipment is shipped
from the factory, the [image speed] is
registered in the [FUNC] key.
Auto Shift:
The image is automatically shifted so that the
bottom is always displayed.
Setting of Manual Shift
The scope of range starting with the shift value is
displayed.
Range
5.0
10.0
20.0
50.0
100
160
300
500
Auto shift
Auto range
Range
5.0
10.0
20.0
50.0
100
160
300
500
Auto shift
Auto range