SERVICE MANUAL
46
10SEP02 – 9B8949
Adjusting the Squareness of the DRYER RACK
[1]
Remove the DRYER RACK.
Important
Do not remove the SCREWS on the COVERS or the REINFORCING BARS.
[2]
Loosen the 2 SCREWS on:
• FRONT COVER
• REAR COVER
[3]
Place the DRYER RACK on a flat surface with the top down.
Important
The 4 SCREWS and the 4 REINFORCING BARS are not visible in the graphic.
[4]
Loosen the 4 SCREWS on one end of the 4 REINFORCING BARS.
[5]
Press down on the 2 SIDE PLATES to make uniform contact with the flat surface.
[6]
Tighten:
• 4 SCREWS on the 4 REINFORCING BARS
• 2 SCREWS on the FRONT COVER
• 2 SCREWS on the REAR COVER
[7]
Install the DRYER RACK into the PROCESSOR.
H164_0035HC
H164_0035HCA
CHAIN
FRONT COVER
2 SCREWS
2 SCREWS
DRYER RACK
2 SIDE PLATES
REAR COVER
