15
Working With Your Pictures
Beaming Pictures to Another Handheld
You can beam your pictures to another PALM handheld via the IR port. The
receiving handheld must have an IR port, have KODAK PALMPIX Software
installed, and be at its home screen when you beam the pictures.
1
In the PALM Preferences (Prefs) menu, make sure Beam is set to On.
2
With PALMPIX Software running, select the picture in the Image List.
3
Tap Menu
, then Record
→
Beam Image.
For more information about beaming pictures, refer to the guides that came
with the PALM handheld.
If the receiving handheld does not have KODAK PALMPIX Software installed,
you can beam the application as well. Refer to the guides that came with the
PALM handheld.
Storing Pictures on Your Handheld
Pictures are saved
m
Pictures stored on your PALM handheld are saved when you turn off the
handheld.
Pictures are not saved
m
If the PALM handheld loses power (batteries are exhausted) for an extended
period of time, it may lose data, including your pictures. For more
information, refer to the guides that came with the PALM handheld.
m
If you delete the KODAK PALMPIX Software from the PALM handheld, the
pictures are also deleted.
Summary of Contents for PALMPIX
Page 28: ......
