Kodak Imagelink 500 User Manual Download

Page: 69 / 112

B-2

A-61408 September 1995

Patch Location on Documents

Patches must appear parallel to the leading edge of the document
(as shown).

Leading Edge

(fed into the transport first)

In addition, the following must be true:

• The top of the patch must be less than 0.80 inches (20 mm) and

greater than 0.20 inches (5 mm) from the leading edge of the
document.

• The bottom of the patch must be no more than 1.6 inches

(40 mm) from the leading edge of the document.

• There must be at least 0.20 inches (5 mm) of clear space

surrounding the patch on all sides.

Printing Patches

Patches can be printed on a document or placed on a document
using preprinted patch labels. A patch can be placed directly on
customer documents or on blank documents which are inter-
leaved throughout customer documents.

Summary of Contents for Imagelink 500

















































































































Search results

Summary of Contents for Imagelink 500

Reviews:

Related manuals for Imagelink 500

Brands by name

Popular brands

Kodak Imagelink 500, User Manual

Search results

Summary of Contents for Imagelink 500

Reviews:

Related manuals for Imagelink 500

Brands by name

Popular brands