Kodak Imagelink 500 User Manual Download

Page: 50 / 112

5-8

A-61408 September 1995

Cleaning the Exterior
of the Scanner

Clean the exterior of the scanner, the feed shelf, and the exit
hopper with a soft cloth to remove dust and other particles.
Remove fingerprints or stains with a water-dampened cloth or a
mild cleaning agent.

Vacuuming Inside
the Scanner

Vacuum the inside of the scanner weekly or as required to remove
any dust or debris.

Vacuuming the Horizontal Transport Area

1. Turn the power off.

2. Lift open the Lower Access Door.

CAUTION: For safety reasons the movement of the Lower

Access Door is intentionally slowed with a two-
way rotary damper. Open and close the door
slowly.

3. Lift the release bar to raise the underlying Front Scan Mod-

ule.

Summary of Contents for Imagelink 500

















































































































Search results

Summary of Contents for Imagelink 500

Reviews:

Related manuals for Imagelink 500

Brands by name

Popular brands

Kodak Imagelink 500, User Manual

Search results

Summary of Contents for Imagelink 500

Reviews:

Related manuals for Imagelink 500

Brands by name

Popular brands