8
Chapter 1
Setting the Date and Time
Setting the Date & Time, First Time
The
Date and Time have been reset
message appears the first time you turn
on the camera or if the battery is removed for an extended time.
1
SET DATE & TIME is highlighted. Press the
OK button.
(Select Cancel to set the date and time at a
later time.)
The Date & Time screen appears.
2
Go to step 4 below,
Setting the Date & Time,
Anytime
.
Setting the Date & Time, Anytime
1
Turn on the camera. Press the Menu button.
2
Press
to highlight Setup, then press
the OK button.
3
Press
to highlight Date & Time, then
press the OK button.
The date format is YYYY/MM/DD. The time
is displayed in a 24-hour format.
4
Press
to adjust the date and time. Press
to advance to the
next setting.
5
When finished, press the OK button.
6
Press the Menu button to exit the menu.
The setting remains until you change it.
NOTE: Depending on your computer operating system, Kodak EasyShare
software may allow your computer to automatically update the camera
clock when you connect the camera. See the Kodak EasyShare software
Help for details.
OK
Menu
OK
