27
Chapter 2
Setting Exposure Compensation
Use Exposure Compensation to control how much light enters the camera. This
setting is useful for taking pictures in very large rooms, under low light,
without a flash.
Adjust the exposure by plus or minus 2 steps in 1/2-step increments.
NOTE: Exposure Compensation cannot be used with Long Time Exposure.
1
In any Still mode, press the Menu button.
2
Press
to highlight Exposure Compensation
, then press the OK
button.
3
Press
to select the Exposure
Compensation setting.
m
If pictures are too light, decrease the
value.
m
If pictures are too dark, increase the
value.
4
Press the OK button to accept the change.
5
Press the Menu button to exit the menu.
6
Use the camera screen to frame your
subject. Press the Shutter button
half-way
to set the focus, then continue pressing
completely down
to take the picture.
This setting remains until you change the
Mode dial or turn off the camera.
