2-6
A-61159 May 2002
Installing the
Diagnostic Software
The Diagnostic Software is an easy-to-use tool for setting up, testing,
updating, and troubleshooting your scanner. Installing the Diagnostic
Software is strongly recommended. It is an easy, standard Windows
setup procedure that takes only a few minutes.
NOTE: Software screens and functions described in this User’s Guide
apply to the Kodak-supplied Diagnostic Software. Integrator-
supplied software will be different.
To install the Diagnostic Software and select the TWAIN or ISIS
driver, see your scanner’s Installation CD.
For fastest installation of the Diagnostic Software, accept the default
selections on each setup screen by clicking on Next or I Agree.
IMPORTANT: The TWAIN-compatible and ISIS-compatible device
drivers are loaded from within the Diagnostic Software.
If you are installing the Diagnostic Software in
Windows 95, Microsoft Internet Explorer v4.0 or
greater must be installed on the computer.
After completing the installation, refer to “Testing the System” in
Chapter 6, Diagnostics. Open the Diagnostic Software to run both tests.
NOTE: For more information about the Diagnostic Software, refer to
Chapter 6, Diagnostics.
Registering
Your Scanner
It is very important that you register your scanner so Kodak can provide
you with the best possible service and support that helps maintain your
continuous scanning. Registering your scanner will help us provide you
with firmware and hardware updates as they become available.
You can register online at www.kodak.com/go/docimaging. Or see
the form packed with your scanner and register by fax, mail, or phone.
