Kodak 1400 User Manual Download Page 66

Page: 66 / 88

Setting up the 1400

Troubleshooting

Site Specifications

Printer

Operating the 1400

Printer

Accessories and

Supplies

CONTENTS

PRINTER DRIVER GUIDE

HELP

Introduction

Use a lint-free cloth moistened with isopropyl alcohol or distilled water to
clean the print head, and wipe along the heater line four times:

•

Wipe the full length of the area (always in one direction).

•

Use a clean part of the cloth for each wipe.

•

Apply firm, even pressure.

•

Wipe only the following areas.

Allow the wiped area to dry for about two minutes.

Close the top cover and turn on the printer.

Make a test print.

NOTE:

It may be necessary to repeat Steps 1- 5 several times to remove any
artifacts. If you cannot remove the artifacts, call for service.

Guide bar

Heater line

Summary of Contents for 1400

























































































Search results

Summary of Contents for 1400

Reviews:

Related manuals for 1400

Brands by name

Popular brands

Kodak 1400, User Manual

Search results

Summary of Contents for 1400

Reviews:

Related manuals for 1400

Brands by name

Popular brands