User manual - DATA RECORDER and cooperating software
•
[Refresh]
button
- updates the displayed data;
•
Show cursor
field
- check this field to activate special graphical cursor which allows to
track measurement points of the selected channel graph.
•
Groups
/
Channels
- this box enables creating graphs in two modes:
- for a group
- collective graph for a maximum of 12 measurement channels
(observed channels can belong to different devices);
- for a single channel.
Creating groups is described in the
Group operations
section (
, page
).
Selecting graph type (for a group or single channel)
In order to select table type:
• click appropriate tab
Groups
or
Channels
),
• check specific group or measurement channel. This will display measurement results for
the selected group or single channel (displaying results takes place automatically after
each change of group or measurement channel).
In order to use table for groups the group must be created first. Creating groups is
described in the
Group operations
section (
, page
Change of “From date” or “To date”
Change of start and end date take place the same way as in
Table
Changing the graph display method
Following operations are available for the
graph area
:
•
enlarge graph
- a graph can be enlarged by marking the area of interest with the
mouse pointer. In order to do this first left-click on the graph and,
while holding down the left mouse button, drag the pointer to the
bottom right corner of the graph. The rectangle marked this way will
be enlarged (
9
5
i
i
Summary of Contents for ZLS-2
Page 85: ...85...