Kobold ZLS-2, User Manual

Page: 63 / 117

User manual - DATA RECORDER and cooperating software
FlashDrive or USB malfunction, and other incidental problems, autostorage
function should be controlled by user from time to time. Lack of control can
cause overwriting of data in internal memory or stopping of data recording due
to impossibility of data storage on FlashDrive.
• If “
Password for USB disk write
” parameter has been set, then after power
off / on sequence it is necessary to enter this password to run “Auto data write”
function. To omit this requirement it is recommended to use function “
Register
the disk ” or disable of “ Password for USB disk write ”.
• While “Auto data write” is active and FlashDisk is plugged to USB connector,
pressing the [ENTER] key in any presentation mode will force the storage of
current data to the Flash Drive (other functions of
[ENTER]
key are disabled).
To allow default functions of
[ENTER]
button, it is necessary to unplug Flash
Drive from USB connector.
• Depending on the recording settings, periods between successive storages can
be long. To be sure that current data (up to now) had been written, force data
storage (pressing [ENTER] in any data presentation mode) before disconnecting
the Flash Drive from USB (see the previous note).
7.4.12. ” Language ” parameter
This parameter allows selection of messages and menu language.
6
3