Kobold ZLS-2, User Manual

Page: 73 / 117

User manual - DATA RECORDER and cooperating software
Register Write Range Register description
Alarm configuration parameters for channel No. 1
C0h Yes 0÷1
" AL1 mode " parameter in “ Inputs settings ” submenu for channel 1;
0 – under threshold; 1 – over threshold
C1h Yes -9999÷9999 "
Threshold 1 " parameter in “ Inputs settings ” submenu
for channel 1;
C2h Yes -9999÷9999 "
Hysteresis 1 " parameter in “ Inputs settings ” submenu
for channel 1;
C3h Yes 0÷1
" AL2 mode " parameter in “ Inputs settings ” submenu for channel 1;
0 – under threshold; 1 – over threshold
C4h Yes -9999÷9999 "
Threshold 2 " parameter in “ Inputs settings ” submenu
for channel 1;
C5h Yes -9999÷9999 "
Hysteresis 2 " parameter in “ Inputs settings ” submenu
for channel 1;
Register from C8h to CDh
Alarm parameters in “ Inputs settings ” submenu for channel 2;
registry description like for channel 1 (see registers C0h to C5h).
Register from D0h to D5h
Alarm parameters in “ Inputs settings ” submenu for channel 3;
registry description like for channel 1 (see registers C0h to C5h).
Register from D8h to DDh
Alarm parameters in “ Inputs settings ” submenu for channel 4;
registry description like for channel 1 (see registers C0h to C5h).
Register from E0h to E5h
Alarm parameters in “ Inputs settings ” submenu for channel 5;
registry description like for channel 1 (see registers C0h to C5h).
Register from E8h to EDh
Alarm parameters in “ Inputs settings ” submenu for channel 6;
registry description like for channel 1 (see registers C0h to C5h).
Register from F0h to F5h
Alarm parameters in “ Inputs settings ” submenu for channel 7;
registry description like for channel 1 (see registers C0h to C5h).
Register from F8h to FDh
Alarm parameters in “ Inputs settings ” submenu for channel 8;
registry description like for channel 1 (see registers C0h to C5h).
Configuration parameters for output No. 1
100h Yes 0÷2
“ Mode ” parameter in “ Outputs settings ” submenu for output 1;
0 – inactive (always OPEN)
1 – normally OPEN (N.O.)
2 – normally CLOSED (N.C.)
101h Yes 0÷1
“ Logic func. ” parameter in “ Outputs settings ” submenu for output 1;
0 – OR ; 1 – AND
102h Yes 0÷4
“ Channel 1 ” parameter in “ Outputs settings:source ” submenu for
output 1;
0 – inactive
1 – alarm 1
2 – alarm 2
3 – alarm 1 or 2
4 – alarm 1 and 2
103h Yes 0÷4
“ Channel 2 ” parameter in “ Outputs settings:source ” submenu for
output 1; registry description like for “ Channel 1 ” (see register 102h).
7
3