MAS Instruction Manual
Page 10
CAUTION! Do not mix or interchange parts of tube fittings
CAUTION! Do not mix or interchange parts of tube fittings
CAUTION! Do not mix or interchange parts of tube fittings
CAUTION! Do not mix or interchange parts of tube fittings
CAUTION! Do not mix or interchange parts of tube fittings
made by different manufacturers.
made by different manufacturers.
made by different manufacturers.
made by different manufacturers.
made by different manufacturers.
Finally, check the system’s entire flow path thoroughly for leaks
before proceeding to Section 3, O
PERATION
.
CAUTION! All instruments are leak-tested prior to shipping.
CAUTION! All instruments are leak-tested prior to shipping.
CAUTION! All instruments are leak-tested prior to shipping.
CAUTION! All instruments are leak-tested prior to shipping.
CAUTION! All instruments are leak-tested prior to shipping.
To check your installation, test the fittings only. Do not use
To check your installation, test the fittings only. Do not use
To check your installation, test the fittings only. Do not use
To check your installation, test the fittings only. Do not use
To check your installation, test the fittings only. Do not use
liquid leak detectors such as Snoop® to search for leaks
liquid leak detectors such as Snoop® to search for leaks
liquid leak detectors such as Snoop® to search for leaks
liquid leak detectors such as Snoop® to search for leaks
liquid leak detectors such as Snoop® to search for leaks
inside or outside the MAS. Instead, monitor pressure
inside or outside the MAS. Instead, monitor pressure
inside or outside the MAS. Instead, monitor pressure
inside or outside the MAS. Instead, monitor pressure
inside or outside the MAS. Instead, monitor pressure
decay.
decay.
decay.
decay.
decay.
Figure 2-1
Plumbing Requirements
for Model’s 1100/2100
2.50"
(63.5 mm)
1
/
2
" NPT PIPE
(5 DIAMETERS)
5.0"
(127 mm)
1
/
2
" NPT PIPE
(10 DIAMETERS)
FLOW
➡
EXAMPLE: Cross Section
CORRECT
1
/
2
" NPT pipe for
1
/
2
" NPT flow body
INCORRECT
Avoid use of compression
fitting on inlet of flow body. The
reduction of internal diameter of
the fitting results in a “jet”, creating
noise and affecting calibration.
DO NOT reduce down right at the
inlet with
1
/
4
" pipe.
Summary of Contents for MAS Series
