Heinrichs Messtechnik GmbH
Page 4 of 20
TM/TMU/TM-SH Supplement Manual
For Explosion Flow-meters
1.
Steps prior to operation
Prior to installation and operation, it is essential that the operator familiarizes himself
with all of the instructions and information contained in the manual for non-explosion
proof Coriolis flow meters as well as the present instructions. If any part of either manual
is missing, contact Heinrichs Messtechnik GmbH to request a new manual. These
manuals can also be downloaded from our website.
The TM, TMU and TM-SH sensors described herein are only to be used to measure liquid and gas mass and
volume flow, as well as density and temperature, in conjunction with a transmitter certified for use in the area
and country of operation, and compatible with the parameters of the sensor.
1.1
Installation, mounting, commissioning and maintenance
Installation, mounting, commissioning and maintenance are to be performed by a technician trained to work
with explosion-proof devices, or by a Heinrichs Messtechnik service technician.
Warning:
Any safety relevant maintenance or repairs in terms of explosion-protection is to be
carried out by the manufacturer, an authorized Heinrichs Messtechnik GmbH service
center or under the supervision of an expert in explosion proof devices.
Heinrichs Messtechnik GmbH accepts no liability for any loss or damage of any kind arising from improper
operation of any product, improper handling or use of any replacement part, or from external electrical or
mechanical effects, overvoltage or lightning. Any such improper operation, use or handling shall
automatically invalidate the warranty for the product concerned.
In the event a problem arises with your device, or if you need assistance in diagnosing a problem with your
device, please contact us at one of the following numbers to arrange to have your device repaired:
+49 (0)221 49708-0
+49 (0)221 49708-178
Company:
Heinrichs Messtechnik GmbH
HM-EE (R&D Department)
Robert-Perthel-Strasse 9
D-50739 Cologne
Germany
