5020-M Owner's Manual
Kobelt Manufacturing Co. Ltd.
rev B
mnl5020-M.docx
20 of 27
6.4
R
ECOMMENDED
S
PARE
P
ARTS
The spare parts kept on hand will depend on the severity of the service. As a minimum Kobelt
recommends keeping the following parts for each brake in service:
1.
One Lined set of brake shoes
2.
One set of brake pads with rivets
When purchasing replacement parts refer to Appendix B: Parts List at the back of this manual
for Kobelt component Part Numbers.
It is recommended that any required service work on a Kobelt unit
be performed by a factory authorized service representative. Please
contact the nearest Kobelt authorized distributor for assistance.
The table below itemizes which kit/spare part numbers change with the various brake
configuration options. Please reference this table to ensure you receive the correct parts.
Table 6: Configuration Kit Numbers
Configuration Kit Numbers
Disc Code
Shim Kit
Disc Thickness
-100
5026-3500
3.500 in
-075
5026-3000
3.000 in
-050
5026-2500
2.500 in
Friction Code
Lined Shoe
Friction Material
-N
5020-LSN
non-sparking
-C
5020-LSC
low COF (.12-.15)
-E
5020-LSE
mid COF (.25-.28)
