3.1 EVERYDAY CHECK-UP
The check-up should be done before starting the engine.
Before starting the engine, look around this machine to check for any loose nuts and bolts, any
hydraulic oil, fuel or coolant leakage, and the condition of the attachment and hydraulic system. Check
for any looseness in the electrical wiring and for any accumulated material (leaves, dirt, etc.).
MACHINE FIRE PREVENTION
The deposit of combustible, fuel leakage and oil leakage in heated area around the engine, muffler
and battery may cause fire of machine. Check the area sufficiently, and if the abnormality is found,
repair it or contact our authorized dealer/distributor.
・
Check the engine for any oil, fuel or coolant leakage. Repair as required.
・
Check the area around the engine and radiator for any accumulated material and remove as
required.
・
Check the hydraulic device, hydraulic oil tank, hoses and joints for oil leakage, and repair as
required.
・
Check the travel system, such as the crawler, front idlers and sprockets, for any damage or wear,
and the bolts for looseness.
・
Check the attachments, dozers, cylinders, linkages and hoses for any cracks, wear or looseness,
and repair as required.
・
Check the guards, steps and handrails for damage, and the bolts for looseness. Repair and tighten
them as required.
・
Verify that the gauges and the monitor panel function properly, and replace them as required.
[
3. MACHINE OPERATION
]
3
3-
3
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]
