3.4 STARTING ENGINE
After making sure that no one is stayed and no obstruction is left around the machine, sound horn
and start the engine.
Do not hold the starter switch in the START position for more than 15 seconds. If the engine does
not start, return the starter switch to the OFF position, wait at least 30 seconds, and then try it again.
If this procedure is not followed, it will cause a starter failure and battery discharge.
3.4.1 START-UP UNDER NORMAL CONDITIONS
1. Make sure the pilot control shut-off lever (1)
is in the "LOCKED" position (A).
2. Make sure all control levers and pedals are
set to their "NEUTRAL" positions.
3. Move engine throttle lever (2) to a "position
slightly higher than the low idling position".
4. Turn starter switch (3) to the "START"
position to start the engine.
Release the hand from the starter key
immediately after the engine starts. The
starter key will return to the "ON" position by
itself.
B
A
"LOCKED" position
2
3
Position slightly higher than the low idling
[
3. MACHINE OPERATION
]
3-
12
Copyright©2019 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PS00017ZE08] [1226CsCshWbYs]
