10 www.grupotemper.com
KPAW-01
TRUE RMS 1000A AC WATT Clamp Meter
sum up the phase power measurement
result which had been selected.
if you didn`t select any phase of 3
phase,
∑
is invaild.
SAVE
Press once to store single reading, and
the Meter beeps.The index number shown
on the left secondary display keep on
increasing. The maximum number of data
store is 99, when it achieves 99, the Meter
shows
.
SEL
press
SEL
button to step through first
phase, second phase, third phase and sum
of watts.
Press
SEL
and hold for over 2
second
to enter 3P3W mode.
MAXMIN
Press to start recording of maxinmum it
valid at voltage, current, active power and
apparent power ranges only.
CLEAR
At active energy range, press
CLEAR
and hold for over 1 second to reset time the
zero, then restart the timing.
At all other ranges, press
CLEAR
and
hold for over
1
second to clear stored
readings.
MR
Press once to enter Memory Record mode,
appears and the Meter beeps.
▼/▲
If the Meter steps through sum of
power press
▼/▲
button to switch
display of active power (main display) ,
sum of reactive power (secondary
display) , sum of power factor (main
display) and sum of apparent power.