Kobalt K18LD-26A Manual Download Page 74

Page: 74 / 85

kobalttools.com

SAFETY INFORMATION

Work Area Safety

Cluttered and dark

areas invite accidents.

Power tools create sparks, which may ignite the dust or fumes.

! ! "

tool.

Distractions can cause you to lose control.

Electrical Safety

# " $!

plug in any way. Do not use any adaptor plugs with earthed
(grounded) power tools.

outlets will reduce the risk of electric shock.

%! "

such as pipes, radiators, ranges and refrigerators.

There

is an increased risk of electric shock if your body is earthed or
grounded.

Water

entering a power tool will increase the risk of electric shock.

$ !"

pulling or unplugging the power tool. Keep the cord away
from heat, oil, sharp edges or moving parts.

Damaged or

entangled cords increase the risk of electric shock.

& "

cord suitable for outdoor use.

Use of a cord suitable for

outdoor use reduces the risk of electric shock.

4 "

use a ground-fault circuit interrupter (GFCI) protected
supply.

Use of a GFCI reduces the risk of electric shock.

Summary of Contents for K18LD-26A






















































































Search results

Summary of Contents for K18LD-26A

Reviews:

Brands by name

Popular brands

Kobalt K18LD-26A, Manual

Search results

Summary of Contents for K18LD-26A

Reviews:

Brands by name

Popular brands