Kobalt K18LD-26A Page 18 Manual Download | Manualshive

Page: 18 / 85

background image

18

kobalttools.com

TROUBLESHOOTING

WARNING:

Turn the switch to the “OFF” position and remove the battery pack from the tool

before performing troubleshooting procedures.

Problem

Possible Cause

Corrective Action

The drill/driver does not work

Battery is depleted

Charge the battery

Bit cannot be installed

1. Sleeve is not released

J =

1. Release the sleeve

2. Use the appropriate bit

Motor overheating

Cooling vents are obstructed

Clean, clear vents. Do not cover
vents with hand during operation

5-YEAR HASSLE-FREE WARRANTY

% ?{@ years
" %

This drill/driver is warranted for the original user to be free from defects in material and workmanship.

\ %
return the drill/driver along with proof of purchase to the place of purchase for a free replacement or
refund, or call 1-888-3KOBALT (1-888-356-2258) for warranty service.

This warranty is void if: defects in materials or workmanship or damages result from repairs or
% &
parts; the damage is due to normal wear, damage is due to abuse (including overloading of the tool
beyond capacity), improper maintenance, neglect or accident; or the damage is due to the use of the
% &

This warranty excludes blades, bits, bulbs and accessories.

%
to state.

Printed in China

KOBALT

®

and the K Design

®

are registered trademarks

of LF, LLC. All Rights Reserved.

«
...
16
17
18
19
20
...
»

Summary of Contents for K18LD-26A






















































































Reviews:

No comments

Related manuals for K18LD-26A

Brand: 3 Embers Pages: 24

Brand: PALSON Pages: 28

GRIDDLER PRO GR50E

Brand: Cuisinart Pages: 71

Brand: Cadac Pages: 88

Brand: Coleman Pages: 16

Brand: George Foreman Pages: 28

Brand: Hilti Pages: 34

Brand: La Hacienda Pages: 8

Brand: BeefEater Pages: 22

Brand: Weber Pages: 31

Brand: Rockwell Pages: 12

Brand: KOBE Pages: 4

Brand: EDELHEISS Pages: 36

Brand: Gasmate Pages: 12

Brand: Onward Pages: 24

Brand: Napoleon Pages: 32

Brand: P.I.T. Pages: 20

Brand: P.I.T. Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands