Kobalt K18LD-26A Page 83 Manual Download

Page: 83 / 85

kobalttools.com

OPERATING INSTRUCTIONS

1. Charge the battery pack with the correct charger.

2. Connect the charger to a power supply.

3. Attach the battery pack to the charger by aligning the raised

ribs of the battery pack with the slot in the charger. Slide the
battery pack onto the charger

(Fig. 1)

% % !

to evaluate the condition of the battery pack.

{ '] %

charging.

6. After charging is complete, the green LED on the charger will

be on and the power indicator LED lights will turn off. The
power indicator LED lights will illuminate when the power
indicator button is pressed while the battery pack is off the
charger.

NOTICE:

The battery pack will fully charge, but will not overcharge,

if left on the charger.

NOTICE:

The charger may warm with several continuous charge

cycles. This is part of the normal operation of the charger. Always
charge in a well-ventilated area.

Summary of Contents for K18LD-26A






















































































Search results

Summary of Contents for K18LD-26A

Reviews:

Related manuals for K18LD-26A

Brands by name

Popular brands

Kobalt K18LD-26A, Manual

Search results

Summary of Contents for K18LD-26A

Reviews:

Related manuals for K18LD-26A

Brands by name

Popular brands