7
SAFETY INFORMATION
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
• Do not allow gasoline, oils, petroleum-based products, etc.,
to come in contact with plastic parts. These materials contain
chemicals that can damage, weaken, or destroy plastic.
• An extension cord should not be used unless absolutely
necessary. Use of an improper extension cord could result in a
risk of fire and electric shock. If an extension cord must be used,
make sure that:
• The pins on the plug of extension cord are the same number,
size and shape as those of the plug on charger.
• The cord is properly wired and in good electrical condition.
• The size is large enough for A/C ampere rating of charger as
specified below:
Cord Length (Feet) 25 ft.
50 ft.
100 ft.
Cord Size (AWG)
16
16
16
NOTE: AWG = American Wire Gauge
• Do not operate the charger with a damaged cord or plug, which
could cause shorting and electric shock. If damaged, have the
charger repaired or replaced by a qualified service technician.
• Do not operate the charger if it has received a sharp blow, been
dropped, or has otherwise been damaged in any way. Take it to
a qualified service technician for an electrical check to determine
if the charger is in good working order.
•
Do not disassemble the charger. Take it to a qualified service
technician when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
Summary of Contents for 4913881
