8
OPERATING INSTRUCTIONS
1. Battery Pack
To Attach Battery Pack
a. Press the switch-lock button (F) to the lock position.
b. Align the raised portion on the battery pack with
the grooves on the bottom of the tool and slide the
battery pack onto the saw as shown.
c. Make sure that the latches on the battery pack snap
into place and the battery pack is secured to the tool
before beginning operation.
NOTICE:
When placing the battery pack on the tool,
be sure that the raised rib on battery pack aligns with
the groove on the tool and the latches snap into place
properly. Improper assembly of the battery pack can cause
damage to internal components.
To Detach Battery Pack
a. Place the switch-lock button (F) to the lock position.
b. Press the battery-release buttons to release the
battery pack.
c. Pull forward on the battery pack to remove it from the
tool.
2. Variable-speed Trigger Switch and
Switch-Lock Button
a. To turn the saw ON, press the switch-lock button (F)
marked to unlock the switch, then squeeze the
variable-speed trigger switch (G).
b. To turn it OFF, release the variable-speed trigger
switch.
WARNING
• Battery tools are always in operating condition.
Therefore, always press the switch-lock button marked
to lock the switch when the saw is not in use or
when carrying the saw at your side.
Variable Speed
The variable-speed trigger switch (G) delivers higher speed with increased trigger pressure and lower
speed with decreased trigger pressure.
2
G
F
1a
F
1b
F
