2
Safety, Installation and Warranty Requirements
Please ensure that these instructions are read and understood before commencing installation. Failure to comply
with the instructions listed be low and detail sprinted in t hi s manual can cause product / property / damage,
severe personal injury’, and / or loss of life. Ensure all requirements be low are understood and fulfilled (including
detailed information found in manual subsections).
Licensed’ professional’ heating
contractor
The installation, adjustment,
service,
and maintenance of this equipment
must be
performed by a licensed
professional heating contractor.
"
Please see section
entitled “Important
Regulatory and
Installation
Requirements
”.
Product documentation
Read all applicable documentation
before commencing installation.
Store
documentation near boiler in a
readily
accessible location for reference in
the future by service personnel.
"
For a listing of
applicable literature,
please see section
entitled “Important
Regulatory and Safety
Requirements”.
Advice to owner
Once the installation work is
complete, the heating contractor
must
familiarize the system
operator/ultimate owner with all
equipment, as well as safety
precautions/requirements, shut-
down
procedure, and the need for
professional service annually before
the heating season begins.
Contaminated air
Air contaminated by chemicals can
cause by-products in the
combustion
process which are
poisonous
to
inhabitants and destructive to
Viessmann equipment.
"
For a listing of
chemicals which cannot
be stored in or near the
boiler room, please see
subsection entitled
“Combustion air supply”.
Carbon monoxide
Improper installation, adjustment,
service and/or maintenance can
cause
flue products to flow into living
space.
Flue products contain
poisonous
carbon monoxide gas.
"
For information
pertaining to the proper
installation, adjustment,
service and maintenance
of this equipment to
avoid formation of carbon
monoxide,
please see instructions supplied with
burner.
Fresh air
This equipment requires fresh air for
safe operation and must be installed
ensuring provisions for
adequate
combustion
and
ventilation air
exist.
"
For information
pertaining to the fresh
air requirements of this
product, please see
subsection entitled
“Combustion air supply”.
Equipment venting
Never operate boiler without an
installed venting system
. An
improper
venting system can cause carbon
monoxide poisoning.
"
For information
pertaining to venting
and chimney
requirements, please
see section entitled “Venting
Connection”. All products of
combustion must be safely vented
to
the outdoors.
Warranty
Information contained in
this and related product
documentation must be
read and followed.
Failure
to do so renders warranty
null and void.
Summary of Contents for PYROT KPT 1250
Page 7: ......
