11
1.1 Foreword
Dear System Owner, you have made a good selection in
the PYROT. It will provide you with all the advantages of
a modern, economically efficient heating system. Fully
developed technology in combination with a sturdy design
guarantees a high degree of operational reliability and a
long service life.
These Operating and Maintenance Instructions contain im-
portant information for the intended use, correct operation
and proper maintenance of the PYROT.
Non-compliance with the Operating and Maintenance In-
structions will result in loss of the guarantee.
If you still need any further information after studying the
Operating and Maintenance Instructions:
The Assembly and Installation Instructions contain impor-
tant information about:
-
Standards and regulations
-
Structural surroundings of the boiler plant
-
Transport and assembly
-
Water installation and electrical installation
-
Fire protection
-
Commissioning
as well as an appendix with diagrams of connections and
dimensions and the complete technical specifications.
Our sales and services offices will be glad to provide you
with any further information. Their addresses can be
found on the reverse side of these Operating and Mainte-
nance Instructions.
1.2 Technical standing
The Operating and Maintenance Instructions are in keeping
with the PYROT at the time it is delivered. In the interest
of our customers, we reserve the right to make, without
any notification requirement, subsequent changes result-
ing from further technology developments.
1.3 Intended use
The intended use of the PYROT is for incinerating wood
fuels.
The intended use of the PYROT is stipulated:
-
in the regulations of the Assembly and Installation In-
structions
-
by the limits of the technical specifications
-
in Spec Sheet 1010 "Minimum Requirements for Wood
Fuels/Instructions"
-
by the safety regulations in these Operating and
Maintenance Instructions.
Any other use of the PYROT or use of it going beyond this
will be considered as unintended use unless written ap-
proval by the manufacturer has been obtained.
-
Operation of the PYROT by unqualified personnel,
without any training or knowledge of the Operating
and Maintenance Instructions.
-
Disabling the safety or monitoring devices on the PY-
ROT.
-
Removal of any protective covers or cladding on the
PYROT by unauthorised individuals.
-
Making any conversions or alterations to the PYROT
without approval by the manufacturer.
-
Using spare parts or accessories from other
manufacturers without approval by the manufacturer.
The operating organisation will be liable for any damage or
accidents in case of any unintended use.
1.4 Technical data
The following important limit values apply to the PYROT
heating boiler:
Maximum working pressure
30 or 60 psig
Maximum boiler temperature
250 °F
(closed loop)
The complete technical specifications are listed in the ap-
pendix of the Assembly and Installation Instructions.
1.5 Information documented
The installation instructions contain the information re-
quired according to the subject boilers have been tested
and examined in accordance with:
CSA B366.1-M91
Solid Fuel Fired Central Heating Appliances
CSA C.22.2#3-M88(R2004)
Electrical Features of Fuel Burning Equipment
UL391 (4thEd)
Solid Fuel and Combination-Fuel Central and Supplemen-
tary Furnaces
CSA B365-01
Installation Code for Solid Fuel Burning Appliances and
Equipment
1.6 CSA and ASME certification
The PYROT is delivered with a CSA and ASME on its Rat-
ing plate.
Summary of Contents for PYROT KPT 1250
Page 7: ......
