KNX Jung 230011SU, Operating Instructions Manual

Page: 7 / 8

Switch actuator, 1-gang
Connection mode Screw terminals
Switching voltage AC 250 V ~
Switching current 16 A
Fluorescent lamps 16 AX
Switch-on current 200 μs max. 800 A
Switch-on current 20 ms max. 165 A
Connected load
Ohmic load
3000 W
Capacitive load max. 16 A (140 μF)
Motors 1380 VA
Incandescent lamps 2300 W
HV halogen lamps 2300 W
HV-LED lamps max. 400 W
LV halogen lamps with electronic transformers 1500 W
LV halogen lamps with inductive transformer 1200 VA
Compact fluorescent lamps uncompensated 1000 W
Compact fluorescent lamps parallel com-
pensated 1160 W (140 μF)
Reduction of switching current
per 5 °C in excess of 35 °C
-10%
when installed in wooden or dry construction walls -15%
when installed in multiple combinations -20%
Clampable conductor cross-section
single stranded
0.5 ... 4 mm²
Finely stranded without conductor sleeve 0.5 ... 4 mm²
Finely stranded with conductor sleeve 0.5 ... 2.5 mm²
Connection torque screw terminals Max. 0.8 Nm
Inputs
Control cable (preterminated)
YY6x0.6
Input type Potential-free
Number 3
Total length of extension device cable max. 10 m
Cable type (preferably) J-Y(St)Y
Poll voltage, extension inputs approx. 5 V
6 Accessories
External sensor FF7.8
Condensation sensor BTS01
Leakage sensor LES01
7 Warranty
The warranty is provided in accordance with statutory requirements via the specialist trade.
7 / 8
82404313 25.05.2021
J0082404313