Switch actuator, 1-gang
Figure 2: Connection assignment of control cable (example)
red (RD)
KNX +
black (BK)
KNX -
green (GN)
Input 1 (push-button, switch, contact, dew/leakage sensor)
yellow (YE)
Input 2 (push-button, switch, contact, dew/leakage sensor)
white (WH)
Input 3 (push-button, switch, contact, dew/leakage sensor, NTC temperat-
ure sensor)
brown (BN)
COM inputs 1...3
3
Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed tech-
nical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The function of this device depends upon the software. Detailed information on loadable soft-
ware and attainable functionality as well as the software itself can be obtained from the manu-
facturer´s product database.
The device can be updated. Firmware can be easily updated with the Jung ETS Service App
(additional software).
The device is KNX Data Secure capable. KNX Data Secure offers protection against manipula-
tion in building automation and can be configured in the ETS project. Detailed specialist know-
ledge is required. A device certificate, which is attached to the device, is required for safe com-
missioning. During mounting, the certificate must be removed from the device and stored se-
curely.
Planning, installation and commissioning of the device are carried out with the aid of the ETS,
version 5.7.3 and above.
Intended use
–
Operating in KNX systems
–
Switching of electrical consumers via relay contact
–
Reading in switching states of installation switches or push-buttons and other potential-
free contacts at inputs 1...3
–
Signal evaluation of dew and leakage sensors at inputs 1...3 (see accessory).
–
Acquisition of temperature values via NTC temperature sensor at input 3 (see accessor-
ies)
–
Mounting in appliance boxes according to DIN 49073
Product characteristics
–
Output can be operated via KNX telegrams or extension inputs
–
Three extension inputs for connecting potential-free contacts or dew/leakage sensors.
NTC temperature sensor can be connected to input 3.
–
Supply via KNX, no additional power supply necessary
–
KNX Data Secure compatible
2 / 8
82404313
25.05.2021
J0082404313
