SYMBOLS
Caution / warning
Read the instruction
manual
Wear eye protection
Wear protective gloves
Wear a dust mask
Wear protective,
slipresistant footwear
Switch the product off
and disconnect it from
the power supply before
assembly, cleaning,
adjustments, maintenance,
storage and transportation.
We symbol. waste electrical
products should not be
disposed of with household
waste. Please recycle where
facilities exist. Check with
your Local Authority or local
store for recycling advice.
The product complies with
the applicable European
directives and an evaluation
method of conformity for
these directives was done.
This product is of
protection class II. That
means it is equipped with
enhanced or double
insulation.
FITTING THE BANDSAW TO THE STAND
CAUTION!
Ensure the bandsaw is not
connected to the mains before
mounting to the stand.
• Disconnect the bandsaw from the
mains.
• Connect the bandsaw to the stand arm
15 by placing the arm fixing bolts 20 ,
washers 21 and fixing washers 22 in
the stand fixing holes 8 .
• Ensure all bolts are tight with the
no. 5 Allen key 24 .
ADJUSTING THE GUIDE BAR
ASSEMBLY
CAUTION!
Ensure the bandsaw is not
connected to the mains before
mounting to the stand.
• Open the guide bar locking screws 5 .
• The guide bar 6 can now be adjusted.
• Tighten the guide bar locking screws
to fix the guide bar in place.
Summary of Contents for KN SCM-05P
Page 1: ...Portable saw band Sierra cinta port til para metal con base KN SCM 05P...
Page 11: ...DIAGRAM Portable saw band Sierra cinta port til para metal con base KN SCM 05P...
Page 22: ...DIAGRAMA Portable saw band Sierra cinta port til para metal con base KN SCM 05P...
Page 24: ...www knova com mx...