KNOVA KN SCM-05P, Manual

Page: 5 / 24

SAFETY INSTRUCTIONS FOR PORTABLE BAND SAW
> Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessories contacting a “live”
wire may make exposed metal parts of
the power tool “live” and could give the
operator an electric shock.
> Never leave the Bandsaw unattended
while it is running. Do not put the
Bandsaw down until the blade comes to
a complete stop.
> Before each use, make sure the Tension
Handle is in the tightened position
(making the blade taut).
> Cutting Material. Make sure cutting
material is securely fastened down
before operating the Bandsaw. Work
slowly and carefully when cutting
corners, sharp edges, ragged welds,
etc., to avoid snagging.
> Cutting material and the motor housing
can get very hot during operation. Stop
work until unit cools down to safe
temperature. Spray a coolant or water
onto the blade.
> Maintain labels and nameplates on the
tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
> Avoid unintentional starting. Prepare to
begin work before turning on the tool.
> Do not lay the tool down until it has
come to a complete stop. Moving parts
can grab the surface and pull the tool
out of your control.
> When using a handheld power tool,
maintain a firm grip on the tool with
both hands to resist starting torque.
> Do not leave the tool unattended when
it is plugged into an electrical outlet.
Turn off the tool, and unplug it from its
electrical outlet before leaving.
> This product is not a toy. Keep it out of
reach of children.
> People with pacemakers should consult
their physician(s) before use.
Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference or
pacemaker failure. In addition, people
with pacemakers should: Avoid
operating alone. Do not use with power
switch locked on. Properly maintain
and inspect to avoid electrical shock.
Any power cord must be properly
grounded. Ground Fault Circuit
Interrupter (GFCI) should also be
implemented – it prevents sustained
electrical shock.
> WARNING: Some dust created by
power sanding, sawing, grinding,
drilling, and other construction activities,
contains chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Some examples of these chemicals are:
Lead from lead-based paints Crystalline
silica from bricks and cement or other
masonry products Arsenic and chromium
from chemically treated lumber Your
risk from these exposures varies,
depending on how often you do this
type of work. To reduce your exposure
to these chemicals: work in a well
ventilated area, and work with approved
safety equipment, such as those dust
masks that are specially designed to
filter out microscopic particles.
(California Health & Safety Code
§ 25249.5, et seq.)
> WARNING: The cord of this product
contains lead and/or di (2-ethylhexyl)
phthalate (DEHP), chemicals known to
the State of California to cause cancer,
and birth defects or other reproductive
harm. Wash hands after handling.
(California Health & Safety Code
§ 25249.5, et seq.)
> The warnings, precautions, and
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
Vibration Safety
This tool vibrates during use. Repeated
or long-term exposure to vibration may
cause temporary or permanent physical
injury, particularly to the hands, arms and
shoulders. To reduce the risk of vibra-
tion-related injury:
> Anyone using vibrating tools regularly
or for an extended period should first be
examined by a doctor and then have
regular medical check-ups to ensure
medical problems are not being caused
or worsened from use. Pregnant women
or people who have impaired blood
circulation to the hand, past hand injuries,
nervous system disorders, diabetes, or
Raynaud’s Disease should not use this
tool. If you feel any symptoms related
to vibration (such as tingling, numbness,
and white or blue fingers), seek medical
advice as soon as possible.
> Do not smoke during use. Nicotine
reduces the blood supply to the hands
and fingers, increasing the risk of
vibration-related injury.