KNOVA KN GEN-30, Manual

Page: 10 / 32

9
ACCESSORIES INSTALLATION
• Two-wheel long axie (applicable to generator units
of KN GEN-30)
Axle
Wheel
Handrail
Vibration
reduction
bracket
Vibration reduction
rubber pad
Cotter
pin
Washer
Axle clamp
• Four-wheel long axie (applicable to generator units
of KN GEN-65, KN GEN-80)
Long axle
Brake
dise
Short axle
Axle clamp
Wheel
Washer
Cotter
pin
Some of the units, which are of the electrical starting type,
need to be equipped with external storage battery bracket.
Please conduct the installation according to the following
drawing.
Storage
battery
Storage
battery
clamp
Storage
battery
shield
Storage
battery
shield
Storage
battery
bracket
Bracket
connection tube
Negative
terminal
Positive
terminal
Starte cable
(positive)
Starte
solenoid
Operating steps and installation instructions:
1 Install the positive terminal and negative terminal onto
the generation unit as specified in the drawing.
2 Install the storage battery bracket onto the bracket
connection tube.
3 Install the storage battery shield onto the bracket
connection tube.
4 Install the assembled bracket onto the unit.
5 Put the storage battery into the bracket.
6 Hook the hook bolt to the hole of the bracket,
and install it onto the storage battery clamp.
7 Tighten the bolt and install the storage battery
onto the bracket.
8 Connect the storage battery wires and connect
the negative one first. The connected terminals may
be different as the models of the storage batteries
are different. Take material object as.
9 Some
storage batteries need to be filled with electrolyte
before installation. Please read the specification of
the storage battery carefully.
POWERS OF COMMON APPLIANCES
Electric equipment
Rated
power (W)
Starting
power (W)
Flat panel
television
27”
120
1000 1000
5 ~ 50 5 ~ 50
120
Household appliances
Energy
saving
lamp
Electric
cooker
Electric equipment
Rated
power (W)
Starting
power (W)
Computer 400
50 300
100 100
400
Household appliances
DVD
Refrigerator