4
SAFETY INSTRUCTIONS
Please read and follow all safety instructions provided BEFORE using your new projector. Failure
to comply with safety instructions may result in fire, electrical shock, or personal injury and may
damage or impair protection provided by equipment. Please save all safety instructions.
Safety Definitions:
Warning:
Statements identify conditions or practices that could result in personal injury.
Caution:
Statements identify conditions or practices that could result in damage to your
equipment.
Safety Symbols:
Attention:
For information about usage of a feature, please refer to the User’s Guide.
Warning:
Hot surface. Do not touch.
An arrow pointing to the lamp door on the projector.
Safety Terms
:
Warning:
Don’t look directly into the lens when the lamp is turned on.
Warning:
To replace the lamp, turn off the projector and unplug the power cord. To avoid
burns, wait 30 minutes before opening the lamp door. Follow all instructions provided in
this User’s Guide.
Warning:
Please use the power cord provided. Connect the power cord to a receptacle
with a protective safety (earth) ground terminal.
Warning:
Refer all service to qualified service personnel. Servicing your own projector will void
the warranty. See the following page for the technical support contact information.
Caution:
Don’t block ventilation openings. Use of an unauthorized ceiling mount may lead to
ventilation blockage and/or personal injury.
Caution:
Don’t subject projector to prolonged exposure to smoke.
Caution:
Don’t set liquids on the projector. Spilled liquids may damage your projector.
Caution:
Don’t place the projector on a hot surface or in direct sunlight.
Caution:
Do not drop the projector. Transport the projector in a Knöll approved case
2ft (0.6m)
Do not place objects
Important Operating Considerations
in this area in
Do not place the projector on a tablecloth or other soft
front of projector
covering that may block the vents.
Do not use a non-Knöll ceiling mount. In the unlikely
event of the bulb rupturing, thoroughly clean the area
