19
b. Click Next. Make sure “Search for the best driver” is selected, and then click Next.
c. Uncheck any checked boxes, then click Next. Windows automatically locates the driver. If
this driver has been removed, reload the driver using your Windows operating system CD.
d. When Windows finds the driver, you are ready to install it. Click Next.
e. Click Finish when installation is complete.
NOTE
: With some computers, the order in which you power up the equipment is very important. Most
computers should be turned on last, after all other peripherals have been turned on. Refer to your
computer’s documentation to determine the correct order.
5. The computer image should display on the projection screen. If it doesn’t, press the
source
button on the keypad or the
data
button on the remote to display your computer’s image. Make
sure your laptop’s external video port is activated; see your computer’s user guide for details.
If necessary, make adjustments to the image using the projectors on-screen menus. To open
the menus, press the
menu/select
button on the keypad or remote, and then select the
Display or Image sub-menu. For more information about the menus, see page 23. You may
need to adjust the screen aspect (page 24) or the degamma (page 28).
Turning Off the Projector
If you want to turn off the projector for a short period of time, press the
standby
button on the
keypad or remote. This blanks the screen for fifteen minutes, but keeps the projector running.
(You can change the amount of time the projector stays in standby mode; see page 29 for
details.) After 15 minutes, the lamp goes out. To exit standby mode, press the
standby
button
again. (It may take several seconds for the projection lamp to reach full power and project the
image again.) See page 22 for details on standby mode.
NOTE
: Lamp life will be extended if you turn the power off, then wait 1 minute while the lamp cools
before unplugging the projector. The Lamp LED will light green when the lamp has cooled.
To turn off the projector, press the
power
button. The lamp turns off and the LED blinks amber for
a minute while the fans continue to run to cool the lamp. When the lamp has cooled, the LED
lights green and the fans stop. Unplug the power cord to completely power off the projector.
