CORRIDOR FUNCTION SETUP
Mode 1 (Semi-Bright Brightness Time Setting 24hr)
If ambient light
level becomes
low the luminaire
will automatically
power up to the
user selected
“Semi bright
brightness” setting
until motion is
detected.
(0%, 10%, 20%,
30%)
The luminaire
will automatically
switch off when
ambient light level
has been detected,
including when
motion is detected.
This would not be
the case when set
to “24h” mode
(24hr, 10 Lux, 30
Lux, 50Lux)
When motion
is detected the
luminaire will
automatically
switch to 100%
power until the user
selected “Time”
setting has elapsed.
(10s, 1 Min, 6 Min,
12 Min)
When no motion
is detected the
luminaire will
automatically dim
down to the “Semi
bright brightness”
level that has been
selected by the
user.
When motion is
detected with no
ambient lighting
present, the
luminaire will
automatically
switch to 100%
brightness.
After the
“time” setting
has elapsed,
the luminaire
will dim to
the selected
“semi bright
brightness”
setting.
After the “semi
bright brightness
time” setting
has elapsed the
luminaire will
switch off (unless
set to “24hr”).
Mode 2 (Semi-Bright Brightness Time Setting 1min, 30min, 60min)
6
