SensoGate WA131M
50
ZU0818 Retainer Clamp for Ingold Socket, 25 mm
The retainer clamp prevents the coupling nut of the Ingold socket (25 mm) screw
joint from accidentally loosening.
The wires of the retainer clamp connect SensoGate WA131M to the customer’s
process port. A locking lug on the retainer clamp engages in the groove of the
coupling nut (form-fit).
ZU1055 Retainer Clamp for Process Connec
tion K8
The retainer clamp prevents the coupling nut of the screw joint for a K8 process
connection from unintentionally loosening.
The wires of the retainer clamp connect SensoGate WA131M to the customer’s
process port. A locking lug on the retainer clamp engages in the groove of the
coupling nut (form-fit).
ZU0877 Locking Clamp for Process Connec
tion G1, G1 ¼, R1, R1 ¼, 1
″
NPT
The locking clamp prevents the process screw joint of the installed SensoGate
WA131M with threaded connection from accidentally loosening. The locking
clamp is available for process connections with the following threads:
G1, G1 ¼, R1, R1 ¼, 1
″
NPT
.
The locking clamp can be used with threaded couplings with a minimum length
of 10 mm and an out
er diamet
er of 39 mm to 57 mm.
Flange Protector
The flange protectors protect plastic process connections with DIN flanges and
nominal sizes of DN80 or DN100 from contact with the process medium.
Materials:
ZU0755, PEEK/FFKM DN80
ZU0756, PEEK/FFKM DN100
ZU0757, PVDF/FFKM DN80
ZU0758, PVDF/FFKM DN100
ZU0887 Inlet Hose
The inlet hose is used to supply calibration, cleaning, or rinse media to the re-
tractable fitting calibration chamber.
Inlet Hose: Installation, p. 23
Thread: G 1/8
″
L
ength: 3 m
Nominal siz
e: DN 8
Hose material: EPDM
Connection nipple material: Stainless steel
O-ring material 8x1.5: EPDM
O-ring material 4.5x1.5: EPDM
