Knick Protos 3400 User Manual Download Page 49

Page: 49 / 212

ProgaLog 3000 Software (Option)

for Configuration and Documentation

Fig.: ProgaLog 3000 menu: File

The ProgaLog 3000 software is available for convenient configuration of the

Protos 3400(X) process analysis system. The user interface can be switched to

the Protos display languages English, German, French, Spanish, Italian, Swedish

or Portuguese. The software comes on CD-ROM. It runs under Windows® 8 / 7 /

XP. A card reader for SmartMedia cards is required for transferring the configu-

ration files between PC and Protos 3400.

Configuration with ProgaLog 3000

Insert a SmartMedia card formatted as "memory card" into the analyzer. First,

the configuration data are written to the SmartMedia card. These data can then

be read and edited by the ProgaLog 3000 software.

1. Save the configuration data at the Protos 3400(X)

Parameter setting/System control/Copy configuration.

With “Save“ configuration, the complete device configuration

(except the passcodes) is written on the memory card.
2. Close and remove the SmartMedia card

Select "Maintenance / Close memory card", then remove the card.
3. Read out SmartMedia card with "ProgaLog 3000"

Open the "File / SmartMediaCard" menu of the

ProgaLog 3000 software to read out the configura-

tion data stored on the SmartMedia card.

Now, you can edit all parameters at your PC.

Save the edited configuration file to the

SmartMedia card. Then, insert the SmartMedia card

into the Protos 3400(X) analyzer.

Summary of Contents for Protos 3400





















































































































































































































Search results

Summary of Contents for Protos 3400

Reviews:

Related manuals for Protos 3400

Brands by name

Popular brands

Knick Protos 3400, User Manual

Search results

Summary of Contents for Protos 3400

Reviews:

Related manuals for Protos 3400

Brands by name

Popular brands