Knick Protos 3400, User Manual

Page: 35 / 212

35
Calcheck (Administrator)
20.1 °C
Abort
7.00 pH
Meas distance max +02.00 pH
OK
Off
Failure
Maint. request
Message
Parameter Setting of PHU 3400(X)-110
Note: HOLD mode active
Menu
Module PHU 3400-110 (Administrator)
20.1 °C
Return
TC process medium
Sensor data
Cal preset values
7.00 pH
ORP/rH value
Delta function
Input filter
Sensor data (Administrator)
20.1 °C
Abort
Sensoface
7.00 pH
Temperature detection
Display Display Parameter selection
Sensor type
Slope
Zero
Block Block
OK
Standard Standard
(Pt100)
Off On
Sensocheck Ref el
Sensor data
Sensor data are preset depending on
the sensor type.
Gray display lines cannot be edited.
Sensoface provides information on
the sensor condition (evaluating the
sensor data).
Great deviations are signaled.
Sensocheck can be switched off.
The following parameters are
monitored: Slope, zero, reference
impedance (for ISFET sensors),
glass impedance (pH electrodes),
response time, CalCheck.
The tolerance limits are displayed in
gray.
Limit violations can be signaled by a
message (either "failure" or
"maintenance request").
Sensor monitoring details
20.1 °C
Abort
Sensocheck Glass el
7.00 pH
Zero
Sensocheck Ref el
(Auto)
Slope
Response time
Calcheck
OK
(Auto)
Sensor monitoring details
With “Auto” selected, the limits
calculated by the analyzer are used
(displayed in gray).
With “Sensor monitoring Individual”,
the tolerance limits for the parameters
are displayed in black and can be set.
(Auto)
(Auto)
(Auto)
(Auto)