manualshive.com logo in svg

Knick PORTAVO 904X PH, User Manual

Share
Download
Knick PORTAVO 904X PH User Manual Download Page 8

8

Value-Added Features

Memosens

The Portavo 904 can communicate with 
 Memosens sensors. When these digital sensors are 
connected to the meter, they are automatically 
identified and indicated by the logo shown on the 
right. Furthermore, Memosens allows the storage 
of calibration data, which will be available and 
can still be used when the sensor is connected to 
another Memosens-capable device.

Sensoface

Sensoface provides quick information on the sen-
sor condition. The three “smiley” faces as shown 
on the right represent the sensor condition during 
measurement and after a calibration. When the 
condition deteriorates, an

 

“INFO …”

 

message  

provides additional information on the cause.

Automatic Calibration with Calimatic

Calimatic is a very convenient method for pH 
calibration with automatic buffer recognition. You 
only have to select the buffer set with the buffers 
used. The buffers can then be used in any order.
As delivered, this calibration method is preset. It 
can be adjusted or disabled in the configuration 
menu.

Overview of the Portavo 904(X) PH

Summary of Contents for PORTAVO 904X PH





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands