manualshive.com logo in svg

Knick PORTAVO 904X PH, User Manual

Share
Download
Knick PORTAVO 904X PH User Manual Download Page 40

40

Error Codes and Device Messages

Error messages are indicated as “ERROR …” on the display. Information on the sensor 
condition is indicated by the “Sensoface” icon (friendly, neutral, sad) possibly accom-
panied by an info message (“INFO …”). 

Sensoface (the “smiley” icon) provides 
information on the sensor condition (main-
tenance request). Measurement can still be 
performed. After a calibration, the corre-
sponding Sensoface icon (friendly, neutral, 
sad) is shown together with the calibration 
data. Otherwise, Sensoface is only visible in 
measuring mode. 

The most important error messages and 
“Sensoface” info messages are shown on the 
inside of the protective cover. A complete list 
of messages and their meanings is provided 
in the following tables.

Example of a “Sensoface” message:  
INFO 1 (cal timer expired) 

Example of an error message:  
ERROR 8 (identical calibration media) 

Summary of Contents for PORTAVO 904X PH





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands