25
Data Logger
Data Logger Menu
Logger view
Select using arrow keys, confirm by pressing set.
CONT
Select start address and start the data logger
START
Deletes all entries and starts the data logger at start
address 0001
DEL
Deletes all entries
SET
Select logger type and configure: DIFF, INT, DIF-
F+INT, SHOT (see table below)
set
Data Logger
Configuring the Data Logger
Prerequisite: The data logger is stopped (press meas).
Measurement
STO
Measured value is maintained
set
Logger: CONT blinks
Logger: START blinks
Logger: DEL blinks
Logger: SET blinks
set
Logger: Current logger type
blinks
Select desired logger type using
: DIFF,
INT, DIFF+INT or SHOT.
set
Select the appropriate parameters using
and confirm each selection by press-
ing set. When configuration is finished, CONT blinks. You can start the data logger
by selecting START or CONT (see page 27).
