Knick COND 3400X-041, Short Description

Page: 44 / 100

44
COND 3400(X)-041
Parameter setting
Activated from measuring mode: Press menu key to select menu.
Select parameter setting using arrow keys, press enter to confirm.
Administrator Level
Access to all functions, also passcode setting. Releasing or block-
ing functions for access from the Operator level.
Operator Level
Access to all functions which have been released at the
Administrator level. Blocked functions are displayed in gray and
cannot be edited.
Viewing Level
Only display, no editing possible!
Menu selection
Return to meas
21.3 °C
0.120 mS/cm
Select: [enter]
Lingua
Parameter setting
21.3 °C
0.120 mS/cm
System control
Parameter sets
• Load
• Save
Overview of Parameter Setting
2 parameter sets (A,B) are available in the analyzer.
The currently active parameter set is read on the display.
Parameter sets contain all settings except:
Sensor type, Options, System control settings
Up to 5 parameter sets (1, 2, 3, 4, 5) are available when a
SmartMedia card (Option) is used.
Memory card (Option)
• Record logbook
• Register recorder
• Decimal separator
• Card full
• Format Menu only appears with SmartMedia card inserted.
Make sure that it is a memory card,
not an update card.
Commercially available SmartMedia cards must be formatted
before they can be used as memory card.
Copy configuration The complete configuration of an analyzer can be written on a
SmartMedia card. This allows transferring all device settings to
other devices with identical equipment (exception: options and
passcodes).
Function control matrix
• Input OK2
• Left softkey
• Right softkey
Select control element for the following functions:
- Parameter set selection
- KI recorder (Start/Stop)
- Favorites menu (selected diagnostics functions)
- Unical (fully automated probe controller)
Time/date
Point of meas description
Release of options
Software update
Logbook
Buffer table
Factory setting
Passcode entry Select display format, entry
Can be called from the diagnostics menu
A TAN is required to release an Option.
Software update from SmartMedia card (update card)
Select events to be recorded
Enter own buffer set for automatic calibration
Reset all parameters to factory setting
Edit passcodes
Return
Viewing level
Administrator level (All Data) adm
(Operation Data) opl
(All Data) view
Operator level