![Knick COND 3400X-041 Short Description Download Page 28](http://html.mh-extra.com/html/knick/cond-3400x-041/cond-3400x-041_short-description_1980118028.webp)
28
COND 3400(X)-041
Safety Information
CAUTION!
Never try to open the module! If a repair should be required, return the module
to our factory. If the specifications in the instruction manual are not sufficient
for assessing the safety of operation, please contact the manufacturer to make
sure that your intended application is possible and safe.
Be sure to observe during installation:
• Switch off power supply before replacing or inserting a module.
• Protect the signal inputs of the modules against electrostatic discharge.
• Before commissioning it must be proved that the device may be connected
with other equipment.
• Observe correct shielding: To avoid interferences, the cable shielding must
be completely covered by the ESD shielding cap.
Intended Use
The module is an input module for conductivity measurement with commer-
cially available 2- or 4-electrode sensors.
The COND 3400X-041 module is intended for operation in locations subject to
explosion hazards which require equipment of Group II, device category 2(1),
gas/dust.
Application in hazardous locations: CON 3400X-041
The module is approved for operation in hazardous locations.
Observe all applicable local codes and standards for the installation of
electrical equipment in hazardous locations. For orientation, please refer to
IEC 60079-14, EU directives 2014/34/EU and 1999/92/EC (ATEX), NFPA 70 (NEC),
ANSI/ISA-RP12.06.01.
• When installing the device in a hazardous location, observe the specifica-
tions of the EC-Type-Examination Certificate and, if applicable, of the Control
Drawing (download: www.knick.de).
• Before commissioning you must prove that the device may be connected
with other equipment, such as a supply unit including cables and wires.
• In hazardous locations the device shall only be cleaned with a damp cloth to
prevent electrostatic charging.
• Devices and modules which have already been used shall be subjected to
a professional routine test before they may be operated in another zone or
another type of protection.
Summary of Contents for COND 3400X-041
