Operating vacuum pump system
Vacuum Pump System SC 920G
30
Translation of original Operating Instructions, English, KNF 121308-121311 07/18
Calling the stored data point tables:
Press the button to select data point tables (arrow in Fig. 13)
and select the required data point table.
You can now see the data point table that is stored under the
number.
Up to 10 different data point tables can be stored and called as
required. The number in the display (arrow in Fig. 13) indicates
the data point table that is currently selected.
Actuating the vacuum pump system (Paging)
When you press the circle symbol for the active process (Fig. 8/
5
,
page 25) in the hand terminal display, the LED next to the page
button (Fig. 15, page 32) on the vacuum pump system will blink.
The other way around, the hand terminal will answer with a signal
tone if you press the paging button of the vacuum pump system
(see chapter 8.2, page 32).
No wireless connection
If there is no wireless connection between the hand terminal and
the related vacuum pump system (for example if the vacuum pump
system is not switched on or the wireless connection is being
established or is interrupted):
The message "No connection" will blink in the hand terminal's
display (see figure 14);
An audible warning will be emitted if a button on the touch-
screen is pressed.
Refer to chapter 10, table 9 for tips on resolving this problem.
Fig. 14: Display „No connection“
